Z3x Easy Jtag Plus Box - Full Version With eMMC Socket, which boasts some MAJOR hardware improvements and Features including One click device repair, Boot repair, Data recovery, eMMC firmware repair, Partition management, eMMC service operations, SPI memory programming.
This Upgraded PLUS version features ultra fast data transfer, has the possibility of increasing functionality in the future: hardware of the new box is ready to support new protocols like UFS* and NAND*.
- One click device repair
- Boot repair
- Data recovery
- eMMC firmware repair
- Partition management
- eMMC service operations
- SPI memory programming
- Combining the top quality materials with best engineering and elegantly designed hardware for the powerful eMMC Socket.
- Made from the high quality materials
- Over 10K cycles of lifetime performance in your service center
- Wide range of eMMC IC supported by: BGA153/169, BGA162/186, BGA221, BGA529
- High-speed up to 30 MB per second over 8 bit bus.
- EMI resistant design, low noise components
- Integrated power logic. Additional power source is no more need
- Surge protection - smart fuse driven (0.5A threshold)
- DUMP AND PINOUTS DATABASE
Free access to large dump and pinouts database and constantly updated software tools
The main application allowing you to use most of the product features. It's the most powerful tool of all
Lightweight software, made especially for mobile phones repair, eMMC memory chips replacement and user data recovery
Identifying, reading, writing, verifying and erasing flash chips. It is designed to flash BIOS images on mainboards, routers, e.t.c.
- EASY JTAG SINGLE PACKAGE REPAIR
Create user customized repair packages. This is partition layout, pinout, eMMC preconfig and instructions
Access to most useful box functionality to create your own decisions
Main benefits of new Z3x Easy Jtag Plus Box
- Updated CPU AT SAM3X8E vs LPC1768 in old box.
- Updated FPGA SPARTAN6 vs SPARTAN3 in old box
- Updated Power Logic – Full Digital PWM with ADC control.
- MicroUSB Connector if additional power required.
- VCC and VCCQ overload protection.
- Updated host interface: USB 2.0 Device/Mini Host: 480 Mbps
- Integrated ISP engine: Z3X High Power Pro Engine
- ISP Support 1 and 4 bit connection now **
- Added eMMC 8 bit high speed interface up to 48Mhz
- Integrated NAND engine: NFC with 4 Kbyte RAM buffer and ECC
- Integrated M-PHY interface.
- Integrated SPI/I2C engine: up to 65 MHz for HSMCI and SPI clock lines
- Integrated Self Test Core that exclude 90% faults in production.
- Integrated CCID Card Reader for Z3X Software Use
What you get with new hardware :
- Box to Host PC speed increase up to 35MB/sec
- JTAG Interface speed increase 20%
- eMMC ISP Speed increase up to 4MB/sec
- eMMC 8 Bit Speed up to 26MB/sec
- Compatibility with 99.9 host PC systems and OSes
- Compatibility with old Easy JTAG G1 ISP adapters ( 1bit )
- Adapter-less ISP ( all stuff inside the box )
- Compatibility with all market popular eMMC sockets ( 8 bit )
- True Plug and Play for modern Windows OS ( 8, 8.1 , 10 )
- Full Support for legacy OS like Windows XP
Z3x Easy JTAG Plus FULL PACKAGE Contents :
- Easy JTAG Plus Box Main Interface Hardware
- Z3X Smart Card with Easy JTAG Plus Activation
- Z3X Certified EMMC Socket (BGA153/169, BGA162/186, BGA221, BGA529)
- 5 Piece Adapter Set
1xJTAG Pin 20 Standard Cable.
1xISP Soldering connector 1bit.
1xISP Soldering connector 4bit.
1x20P to 20P Adapter for E type Socket.
1x20P to 20P Adapter for U type Socket.
- 1 Year Free support access to our file support servers.
- USB A to B Cable
* UFS and NAND protocols due to high speed connection rates requires special sockets and will be released in the future software and firmware releases.
** 4-BIT ISP technology is currently under testing and will be added in the future firmwares.