RIFF Box 2

Unlocking & Flashing Device

RIFF Box 2

  • Vendor:Martview
Availability: In Stock
US $119.00
or

RIFF Box 2 has been released!

  • After six successful years since the first RIFF Box hardware was released, we are introducing a new RIFF Box 2 hardware. Developers did their best to develop a reliable, marvelous, yet functional device.
  • RIFF Box 2 hardware is designed to accommodate a large variety of communication protocols.
  • RIFF Box 2 – Hardware Specification:
  • Dual-core Cortex-M4 MCU @ 204MHz
  • PC to Box USB (Device) Speed: Hi-Speed (480 Mbps)
  • Box to Device (Host) Speed: Full-Speed (48 Mbps)
  • SD/MMC Interface with 1-Bit (DAT0) and 4-Bit (DAT0-DAT3) Bus Width support and SD_CLK up to 52 MHz
  • UART Interface
  • RIFF™ Smart Probing Feature
  • Level-adjustable 23 GPIO Lines (1.65V to 3.6V) for interfacing a range of devices and protocols, such as NAND, SPI, I2C, Pin Finder, etc.
  • 4 fixed 3.3V GPIO Lines
  • RIFF Box 2 - Interface Specifications:

 

  • 20-Pin Male Connector:
  • JTAG Interface: TRST, TDI, TMS, TCK, RTCK, TDO and NRST
  • SWD (Serial Wire Debug) Interface: SWCLK, SWDIO (SWDIO and SWCLK are overlaid on the TMS and TCK pins)
  • 30-Pin Male Connector:
  • SD/MMC Interface 1/4Bit @ 52MHz
  • Level-adjustable 23 GPIO Lines (1.65V to 3.6V)
  • USB Device Connector: connects the Box with PC @ Hi-Speed (480 Mbps), approx. 20 MByte/sec
  • USB Host Connector: connects the Box with USB devices @ Full-Speed (48 Mbps), approx. 1.5-2 MByte/sec
  • RJ-45 Connector:
  • 6.1 RIFF™ Smart Probing Feature
  • 6.2 UART Port
  • 6.3 4 Fixed 3.3V GPIO Lines
  • RIFF Box 2 - Supported SD/MMD Revisions:


Revisions 1.0 to 1.7 (for MMC: v4.0, v4.1, v4.2, v4.3, v4.41, v4.5, v4.51, v5.0) and higher
RIFF Box 2 - Supported JTAG Cores:

  • ARM7
  • ARM920
  • ARM926
  • ARM946
  • ARM7EJS
  • ARM11
  • CORTEX-A5
  • CORTEX-A8
  • CORTEX-A9
  • CORTEX-A15
  • OMAP3430
  • OMAP3630
  • OMAP4430
  • TEGRA2 (CORTEX-A9)
  • TEGRA2 (ARM7)
  • QUALCOMM S3 (ARM7, ARM11, SCORPION)
  • QUALCOMM S4 (ARM7, ARM11, SCORPION)
  • NOVATHOR
  • PXA270
  • PXA312
  • MIPS32™ IR5Bit
  • MIPS32™ IR8Bit
  • RIFF Box 2 - Software:


RIFF JTAG Manager

  • RIFF Remote helper
  • RIFF Admin client / SN reader
  • RIFF Box USB drivers

New software is fully compatible with Windows 10, which provides effortless installation. Just connect RIFF Box to Windows 10-based PC and everything will be installed automatically. For older Windows versions, there are custom drivers provided with RIFF JTAG Manager installer.


RIFF Box 2 - Package Content *:

Riff Box 2 – 1 pc.
Flat Cables – 3 pcs.