2.5 / 3.5 Inches USB 3.0 Aluminum Dual Bay Hard Drive Dock With SD TF Card Read for SATA HDD SSD

2.5/3.5 Inches USB 3.0 Aluminum Dual Bay Hard Drive Dock With SD TF Card Read for SATA HDD SSD

Features:

• Dual bay SATA hard drive docking station equips 4-in-1 function, including storage, clone, USB hub, and Card reader

• Supports UASP protocol: Supports HDD/SSD faster transfer performance, 70% faster than traditional USB 3.0, requires UASP capable host controller and operating system (Real-world performance depends on the disk drive and host system)

• USB 3.0 dual-bay Hard Drive Docking Stations can access both disks simultaneously. Maximum Capacity of 2*16TB

• Support SATA dual hard drives, compatible with 2.5/3.5-inch hard drives with SATA interfaces of various brands on the market, and two hard drives can also be used at the same time

• If data is not read or written for 10 minutes, the hard disk will automatically enter hibernation mode to save power and maximize the life of the hard disk

How to use Offline Clone:

• Ensure the Power Switch on the rear is in the OFF Position and plugged in properly

• Insert Both hard drives and identify the source disk and target disk (Make sure the memory capacity of the B drive is larger/equal to than A drive)

• Make sure that the USB cable is disconnected from any computer during the cloning

• Press the "Clone" button for 3 seconds until the LED starts to flash and the cloning process begins

• Progress indicator with LED: 25%-50%-75%-100%. When the offline clone operation is fully completed, all LEDs will constantly be on

Notes:

• The offline clone function cannot be processed if there are bad sectors or tracks on the hard disk

• Do not try to remove your HDD or SSD device while it is active. Please power off the docking station before removing it

• Please backup files in the target hard drive before cloning. Any files in the target hard drive will be overwritten when offline cloning occurs.

• If you are mounting a drive larger than 2TB, please initialize with Partition Style GPT

• If there is no USB 3.0 port in the front of the desktop computer, it is recommended to connect the 3.5" hard drive enclosure to the rear USB 3.0 port to achieve the best transmission speed

• This product only supports SATA serial interface hard disk and does not support IDE (parallel port) interface, before purchasing, please confirm whether your hard disk is a SATA hard disk

Package includes: 

• 1 x Dual bay SATA hard drive docking station

• 1 x Power adapter