Octoplus FRP Tool – Unlock & Bypass FRP for Samsung, LG, Alcatel, Motorola Devices

Octoplus FRP Tool – Reset Google Factory Reset Protection (FRP) for Samsung, LG, Alcatel, Motorola devices.

Key Features:
• Supports multiple FRP reset methods (UART, ADB, Download Mode) without data loss (except where noted).
• Works with a wide range of Samsung, Huawei, LG, Alcatel, and Motorola models (see supported list).
• Includes Octoplus FRP Dongle with Smart‑Card.

Samsung FRP Reset Operations

1. Reset FRP UART (UFS chips) – No data loss

1. Enter Download Mode (Power Off → hold Volume‑ + Home + Power), then connect USB.
2. Click “Reset FRP UART (UFS chips)”.
3. When prompted, disconnect USB and connect the Samsung Micro UART cable.
4. Hold Volume‑ + Power for 15‑20 seconds; the software will close the wizard and reset FRP.
5. Done.

2. Reset FRP ADB (Combination) – No data loss

Two possible approaches:

I.

1. Flash the “boot.img” from the appropriate Combination firmware.
2. Run “Reset FRP ADB (Combination)” in the software.

II.

1. Flash the full Combination firmware.
2. Enable OEM unlock in Developer Options.
3. Perform a Factory Data Reset.
4. Re‑flash the device with the original stock firmware.

Note: Incompatible “boot.img” may cause boot loops; re‑flash with a different stock firmware to recover.

Also note: Flashing “boot.img” or downgrading firmware is at your own risk.

P.S. If a model is missing from the “SAMSUNG/COMBINATION” folder, we will upload it when available.

3. Reset FRP (Download Mode) – Deletes all user data!

1. Click “Reset FRP (Download Mode)”.
2. Enter Download Mode (Power Off → hold Volume‑ + Home + Power).
3. Connect via Micro USB.
4. Follow the software prompts.

4. Reset FRP UART (eMMC chips) – No data loss

1. Click “Reset FRP UART (eMMC chips)”.
2. Connect the phone to the box with a UART cable.
3. Hold Vol‑ + Power for 15‑20 seconds.
4. When prompted, connect USB; the software will read data.
5. Reconnect UART cable, hold Vol‑ + Power again for 15‑20 seconds.
6. Follow the on‑screen instructions.

Supported Samsung Models

• GT‑I9195I, SC‑01F, SC‑04F, SC‑04G, SC‑05G
• SM‑A3000 – SM‑A910FD (full list available in original description)
• SM‑C111 – SM‑E700M
• SM‑G150N0 – SM‑G935W8
• SM‑J100F – SM‑J727P
• SM‑N750 – SM‑N930W8
• SM‑P350 – SM‑P907T
• SM‑T111 – SM‑T905
• SM‑W2014 – SM‑W2017
• SPH‑G930

Huawei FRP Reset Operations

“Reset FRP” – May delete all user data on some devices/firmware versions. Follow the log prompts carefully.

1. Remove SD and SIM cards.
2. Enter FastBoot Mode (Power Off → hold Volume‑, connect USB, wait for FastBoot).
3. Install required drivers.
4. Click “Reset FRP”.
5. Follow software prompts.

Supported Huawei Models

• WAS‑LX1, WAS‑L22J, WAS‑LX2, WAS‑L03T, WAS‑LX3, WAS‑AL00, WAS‑LX1A
• BLN‑L21, BLN‑L22, BLL‑L21, BLL‑L22, BLN‑L24, BLL‑L23, BLN‑TL10, BLN‑AL10, BLN‑TL00, BLN‑AL20
• EVA‑L19, EDI‑AL10, EVA‑AL00, VIE‑AL10, KNT‑AL20, EVA‑TL00, EVA‑DL00, EVA‑L09, VIE‑L09
• NEM‑AL10, NEM‑L31, NEM‑L51, NEM‑L21
• VNS‑L01, VNS‑L22, VNS‑TL00, VNS‑L53, VNS‑L21, VNS‑L31
• NXT‑L29, FRD‑L09, FRD‑L02, NTS‑AL00, BTV‑W09, FRD‑L14, FRD‑L19, BTV‑DL09, CAM‑L21, CAZ‑TL10, CAN‑L11, BAC‑L21

LG FRP Reset Operations

“Reset FRP” – May delete all user data on some devices/firmware versions. Follow the log prompts carefully.

1. Remove SD and SIM cards.
2. Enter Download Mode (Power Off → hold Vol+ and connect USB).
3. Install required drivers.
4. Click “Reset FRP”.
5. Follow software prompts.

Supported LG Models

• D850 – D859
• F500K – F800S
• G600K – G600SR
• H340 – H990TR (full list available in original description)
• K100 – K600HK
• LS450 – LS997
• M150 – MS631
• RS988, S02, TP260, TP450, US215 – US996, VS425 – VS995

Alcatel FRP Reset Operations

“Reset FRP” – No data loss.

1. Remove SD and SIM cards.
2. Install required drivers.
3. Power off and connect USB.
4. Click “Reset FRP”.
5. Follow software prompts.

Supported Alcatel Models

• OT‑6055U, OT‑5056D, OT‑6039Y, OT‑6045I, OT‑5065D, OT‑4060A, OT‑6039K, OT‑5054O

Motorola FRP Reset Operations

“Reset FRP” – No data loss (may not work on devices with the latest security patches).

1. Enter Factory Mode (Power Off → hold Vol‑ + Power, select “Factory Mode”).
2. Connect USB.
3. Install required drivers.
4. Click “Reset FRP”.
5. Follow software prompts.

Supported Motorola Models

• XT1021, XT1063, XT1092 – XT1096, XT1254, XT1521 – XT1528, XT1540, XT1550, XT1557, XT1562, XT1565, XT1575, XT1585, XT1602, XT1607, XT1621 – XT1622, XT1625, XT1641 – XT1644, XT1650, XT1655, XT1676

Package Content

• Octoplus FRP Dongle with Smart‑Card – 1 pc.

NOTE: We do not provide usage instructions. Ensure you know how to operate the tool before purchasing. For help, visit the official forum at https://www.martview-forum.com/forums/octopus-octoplus.168/.