SUGON 8610DX 1000W Hot Air Rework Station LED Display Lead-Free Heat Gun Microcomputer Temperature Adjustable

SUGON 8610DX 1000W Hot Air Rework Station LED Display Lead-Free Heat Gun Microcomputer Temperature Adjustable

Features:

• It has four working channels: CH1, CH2, CH3, CH4, and

• The air volume and temperature of each channel can be set and stored.

• It has a variety of protection functions and perfect button functions.

• The convenient real-time operation, with magnetic switch control, the handle is placed in the hand

• The handle frame immediately goes to sleep.

• With the automatic sleep function, the parameters can be adjusted in the sleep state

• Set up.

• Sensor closed loop, microcomputer zero-crossing trigger temperature control, high power,

• The temperature rises quickly, and the temperature adjustment is convenient and accurate, and stable and is not affected by the air output.

• Using a brushless vortex fan, the airflow is adjustable, the range is large, and it can be suitable

• Should be used for multiple purposes.

• The system is equipped with an automatic large air volume cooling function to extend the life of the heating element,

• Protect the hot air handle.

• Real-time ℃/℉ temperature display function.

• Has the function of self-calibration of temperature.

 
Use:

• Suitable for disassembly and soldering of a variety of components, such as SOIC, CHIP, QFP,

• PLCC, BGA, etc.

• Suitable for heat shrinkage, drying, paint removal, debonding, thawing, preheating, disinfection,

• Glue welding, etc.

• The air volume is adjustable, suitable for fields that require small air volume and large air volume heating

• Together.

• Suitable for lead-free hot air desoldering occasions.

 
Note:

• Temperature unit conversion

• During use, press the "multi-function button" to use the warm

• Degree "℃→℉" or "℉→℃".

• Buzzer settings

• During use, press and hold the "multi-function button" for two seconds to turn off

• Turn off or turn on the buzzer sound.

• Temperature calibration settings

• When the host is off, press and hold the "Multi-function button" for two seconds, then press

• Turn on the power switch to enter the temperature calibration setting status interface, press the air volume

• +- the key to set the correct temperature, after setting, click "more

• Function key" exits the temperature calibration function and enters the working state.

Package includes:
1 x SUGON 8610DX
1 x Air gun stand
5 x Nozzle
1 x Grounding wire