SuperSnow QPE Unlock Card for iPhone 12 to 16 Series Support China Mobile Unicom Telecom 4G / LTE / 5G

SuperSnow QPE Unlock Card for iPhone 12 to 16 Series Support China Mobile Unicom Telecom 4G/LTE/5G

Applicable models：

• As some phones have been converted to dual SIM, the eSIM chip is physically removed and the eSIM cannot be downloaded, resulting in the inability to download and install eSlM

• We have made an external SIM card to replace the internal eSIM function and achieve the same unlocking effect

• Before purchasing you must ensure that your phone meets the following requirements: the phone has been converted to a dual SIM holder, the cardholder can be installed on both sides of the phone, and the phone can be installed on both sides of the phone holder can be fitted with both the front and back of the sim card and the back of the card can be read by the phone after insertion

Details:

• For Apple phones with carrier SM locks, if you want to enable the use of other carrier SM cards, only the TMS unstable signal mode can barely be enabled until then, but problems such as dropped signals, pop-up activation pop-ups, missed calls, telecom cards not being able to make calls, etc. are plaguing the user experience and are very unfriendly. It was not until the Super Snow team launched a breakthrough QPE card sticker solution that became a better option for locked phones

• The meaning of QPE: Q (Qualcomm Qualcomm baseband); P (pSIM physical card); E (eSlM electronic card)

• The QPE unlocking solution is a clever integration of eSIM and Qualcomm baseband to enable plug-in physical SIM cards to be used in locked devices

• Supports iPhone models that use Qualcomm baseband and include eSlM functionality, such as the mainstream iPhone 12 to 16 series, SE3, etc

• Important highlights: Plug-and-play signal stability without dropping or skipping activation, including telecom card support for HD voice, other carriers such as Mobile, Unicom, and Broadcast cannot achieve HD voice at the moment due to iOS configuration permissions

• The network mode theoretically supports GSM2G, NCDMA3G, FDD LTE4G, TDD LTE4G, and 5G, but due to the difference in frequency band support of different models, different locked network operators, and the actual use of SM card operators' wireless network frequency band allocation and base station signal coverage differences, the actual effect of access to the 5G network varies from machine to machine and from network to network, what QPE solution can ensure is Stable incoming signal

• With the current known test results, China Telecom can support 5 G VOLTE; AT&T models can support China Mobile's 5G call fallback 2G, Unicom supports 5G when the 5G network coverage band matches the original band support of the locked machine, and the call fallback 3G

• Some small operators lock the network driver parameters adapted to the mobile Unicom network differences are large and may cause phone calls to fall back fail, these card stickers are currently no solution.

• Users can ensure stable use of the 4G (LTE) network regardless of which operator's card is used. (Support for users to change cards)

• Disadvantages, this solution can not achieve mobile Unicom (professionally speaking, non-CDMA hybrid network operator SIM card) HD voice; in view of the combination of this solution Qualcomm baseband, eSM configuration of two factors, may be affected by iOS update system, can not guarantee the subsequent Apple through iOS update to block such unlocking method, currently supports to the latest iOS18 system. Therefore, users are not recommended to update their systems subsequently

• Why is HD Voice not available on Mobile Connect? Because the carrier profile loaded on the OS is that of the original carrier, resulting in a mismatch between the VOLTE registered address and the actual sim card, it cannot be enabled. If there is a subsequent jailbreak, you can modify the correspondence to make it match, then VOLTE can be enabled and 5G band support will also be matched

Package includes:

• 1 x Unlock Card